Purification Columns Set for Explora FDG4 Module KT-500-3

Applications The KT-500-3 FDG purification cartridge was designed for the purification of 18F-FDG using the Siemens ExploraTM FDG4 Module.
Pre-processing method
  • 1.It should be packed into the column sleeve and tighten the column sleeve cap after removing the plug.
  • 2.The purification column is filtered by 20 ml sterile water for injection for 2-4 minutes.
  • 3.Use the empty syringes of 20 ml to rule out a large number of moisture, repeat this once again.
  • 4.Install and use it.

    • The KT-500-3 should be stored at 2℃-8℃. Short-term (< 1 month) storage at higher temperature, e.g. during transport, doesn’t affect product quality. Stability: 12 months from date of manufacturing.

    • Handle, transport and store all chemicals with care, avoid inhalation, ingestion, eye and skin contact. Wear suitable protective clothing.

    • Manufactured according to requirements of cGMP, ISO 9001:2008 and ISO 14001:2004.
    • We certify that all test results meets the requirements of Huayi specification.
    • For use by qualified personnel only.
    • Care must be used when handling this product.